The moisture sensor cable is used to monitor the ambient relative humidity at two to four different sensor points in the grain bin. The relative humidity is used to calculate grain moisture content using the EMC curve (Equilibrium Moisture Concentration).The data from these sensors is used to turn on the aeration fans only when needed to minimize shrinkage due to loss of moisture content. Crop-Protector™ Aeration Control software also shows the moisture content of the grain over time and displays the information on a trend curve. In most silos, a single moisture cable is all that is needed to monitor grain moisture content. Accurate, digital moisture measurement helps control losses due to spoilage that can occur if excessive moisture is present, or shrinkage due to moisture loss caused by excessive aeration.
BinMaster – Moisture Sensor Cable
- Helps avoid shrinkage via reliable, digital moisture monitoring
- Control exhaust fan operation by monitoring humidity in head space
- Initiate aeration only when absolutely needed to prevent shrinkage
- Monitoring of grain and silo moisture conditions using easy-to-use PC software
- For use in all types of grain by simply changing software parameters
Communication: Sub-Hubs collect data from moisture cables. Master-Hubs collect data from Sub-Hubs and send it to the Crop-Protector™ Manager software on a PC.
Moisture Sensor Cable Diameter: Ø.42 in. (10.8mm)
Maximum Cable Length: 78 ft. (24 meters)
Tensile Strength: 4,409 lb. (2.000 Kg)
Sensors per Cable: 1 to 4
Cable Anchoring: Optional attachment eye available
Grain Moisture Sensing Range: 8% to 24%
Head Space Moisture Sensing Range: 2 to 99% rH